RGB LED linear tape runs over 20 meters (more than 4 reels), require an amplifier. The LTRGB-AMP enables longer runs to be controlled on one controller. For longer runs requiring more amplifiers, please consult factory.
NOTE: Use only electronic non dimmable power supplies. RGB brightness is controlled exclusively by the controller , do not dim on the primary side or use a dimmer switch. Max length of tape load on a given run is 1 reel(36watts). Multiple runs can be fed off of the controller and amplifiers. Do not exceed total maximum wattage loads on the controller or amplifier.(144w) Max load on the controller itself is 144watts, maximum load on any single amplifier is 144 watts. Each controller and amplifier requires a 12VDC input to power the load on that device. Multiple amps can be connected to the controller allowing for larger systems.
| Catalog No. | Description | Wattage | Amps | Finish |
|---|---|---|---|---|
| RGB-AMP | 12VDC Flexible RGB LED Linear Amplifier | 144W | 16.0 Max | Aluminum |
There are no Photometrics available for these products.
There are no drawings available for these products.
9830 W. 190th Street
Mokena, IL 60448
Toll-Free (866) 671-0811
Fax: (708) 478-2640
sales@gmlighting.net
